ITech IT8200 Series

TRIGger Subsystem
Copyright © ITECH Electronic Co., Ltd. 21
Chapter9 TRIGger Subsystem
TRIGger:LIST:SOURce <source>
This command is used to set and query the trigger source of the LIST function.
Syntax
TRIGger:LIST:SOURce <source>
Argument
<CPD>
IMMediate|MANual|BUS|TRIG1|TRIG2
Query syntax
TRIGger:LIST:SOURce?
Returns
IMMediate|MANual|BUS|TRIG1|TRIG2
Example
TRIG:LIST:SOUR MAN //The trigger source of LIST function is
selected as manual panel trigger.
TRIGger:SWEep:SOURce <CPD>
This command is used to set and query the trigger source of SWEEP function.
Syntax
TRIGger:SWEep:SOURce <CPD>
Argument
<CPD>
IMMediate|MANual|BUS|TRIG1|TRIG2
Query syntax
TRIGger:SWEep:SOURce?
Returns
IMMediate|MANual|BUS|TRIG1|TRIG2
Example
TRIG:SWE:SOUR MAN