ITech IT8200 Series

SURGesag Subsystem
Copyright © ITECH Electronic Co., Ltd. 93
<action>: trigger action setting mode IMMediate|PHASe.
Syntax:
SURGesag:ACTion <action>
Arguments
IMMediate|PHASe
Query syntax:
SURGesag:ACTion?
Returns:
IMMediate|PHASe
Example
SURGesag:ACTion IMMediate //Set the present trigger action to
IMMediate.
SURGesag:ACTion?
SURGesag:SYMMetry <bool>
This command is used to set and query the symmetry mode switch of the
surge/trap wave.
Syntax:
SURGesag:SYMMetry <bool>
Arguments
0 | OFF | 1 | ON
*RST
OFF
Query syntax:
SURGesag:SYMMetry?
Returns:
0 | OFF | 1 | ON
Example
SURGesag:SYMMetry 1 //Turn on symmetry mode.
SURGesag:SYMMetry? //Query the switch status of symmetric mode.
SURGesag:REPeat:COUNt <NR1>
This command is used to set and query the number of continuous surge/trap