FETCh & MEASure Subsystem
Copyright © ITECH Electronic Co., Ltd. 46
FETCh[:SCALar]:CURRent:HARMonic:DISTort?
<[A|B|C]>,<NR1>
MEASure[:SCALar]:CURRent:HARMonic:DISTort?
<[A|B|C]>,<NR1>
This command is used to measure current harmonic components.
Syntax:
FETCh[:SCALar]:CURRent:HARMonic:DISTort? <[A|B|C]>,<NR1>
Arguments
<[A|B|C|CH1|CH2|CH3]>,<NR1>
NR1 range: 0-50
Returns:
<NRf>
Example
FETC:CURR:HARM:DIST? CH3,10
FETCh[:SCALar]:VOLTage:HARMonic:PHASe?
<[A|B|C]>,<NR1>
MEASure[:SCALar]:VOLTage:HARMonic:PHASe?
<[A|B|C]>,<NR1>
This command is used to measure the phase of voltage harmonics.
Syntax:
FETCh[:SCALar]:VOLTage:HARMonic:PHASe? <[A|B|C]>,<NR1>
MEASure[:SCALar]:VOLTage:HARMonic:PHASe? <[A|B|C]>,<NR1>
Arguments
<[A|B|C]>,<NR1>
NR1 range: 0-50
Returns:
<NRf>
Example
FETC:VOLT:HARM:PHAS? A,5
To Next Page
Loading...