ITech IT8200 Series Programming Guide

Input Subsystem
Copyright © ITECH Electronic Co., Ltd. 74
Arguments
<WYE|DELTa>
Query syntax:
INPut:LINE:CONNection?
Returns:
<WYE|DELTa>
Example
INP:LINE:CONN WYE
INPut <state>
This command is used to set the input state.
Syntax:
INPut <state>
Arguments
0|OFF|1|ON
Query syntax:
INPut[:STATe]?
Returns:
0|OFF|1|ON
Example
INP 1
INPut:RECTified[:STATe] <boolean>
This command is used to set the state of rectified function.
Syntax:
INPut:RECTified[:STATe] <boolean>
Arguments
0|OFF|1|ON
Query syntax:
INPut:RECTified[:STATe]?
Returns:
0|OFF|1|ON

ITech IT8200 Series Specifications

General

Brand	ITech
Model	IT8200 Series
Category	Measuring Instruments
Language	English