ITech IT8200 Series

SOURce Subsystem
Copyright © ITECH Electronic Co., Ltd. 72
Arguments
<NRf+>,[NRf+],[NRf+]
Query syntax:
[SOURce:]CE:TB:C? [MAXimum| MINimum]
Example
CE:TB:C 10
[SOURce:]CE:TB:C:VINitial <NRf+>[,NRf+][,NRf+]
This command is used to set or query the initial voltage value of capacitance, Unit:
V.
Syntax:
[SOURce:]CE:TB:C:VINitial <NRf+>[,NRf+][,NRf+]
Arguments
<NRf+>,[NRf+],[NRf+]
Query syntax:
[SOURce:]CE:TB:C:VINitial? [MAXimum| MINimum]
Example
CE:TB:C:VINitial 10
[SOURce:]CE:TB:D:VOLTage <NRf+>[,NRf+][,NRf+]
This command is used to set or query diode voltage under Rectifier single
phase RLC mode,Unit:V
Syntax:
[SOURce:]CE:TB:D:VOLTage <NRf+>[,NRf+][,NRf+]
Arguments
<NRf+>,[NRf+],[NRf+]
Query syntax:
[SOURce:]CE:TB:D:VOLTage? [MAXimum| MINimum]
Example
CE:TB:D:VOLTage 10