ITech IT8200 Series

SOURce Subsystem
Copyright © ITECH Electronic Co., Ltd. 66
Query syntax:
POWer[:LEVel][:IMMediate][:AMPLitude]? [MAXimum| MINimum]
Arguments
<NRf+>[,NRf+][,NRf+]
Example：
POWer 500
[SOURce:]KVA[:LEVel][:IMMediate][:AMPLitude]
<NRf+>[,NRf+][,NRf+]
This command is used to set or query the apparent power under CS mode. Unit
kVA.
Syntax:
KVA[:LEVel][:IMMediate][:AMPLitude] <NRf+>[,NRf+][,NRf+]
Query syntax:
KVA[:LEVel][:IMMediate][:AMPLitude]? [MAXimum| MINimum]
Arguments
<NRf+>[,NRf+][,NRf+]
Example：
KVA 10
[SOURce:]PSHift[:LEVel][:IMMediate][:AMPLitude]
<NRf+>[,NRf+][,NRf+]
This command is used to set or query the phase shift between voltage and
current.
Syntax:
PSHift[:LEVel][:IMMediate][:AMPLitude] <NRf+>[,NRf+][,NRf+]
Arguments
-90° ~ +90°
Query syntax:
PSHift[:LEVel][:IMMediate][:AMPLitude]? [MAXimum| MINimum]
Arguments
<NRf+>[,NRf+][,NRf+]