WAVEform Subsystem
Copyright © ITECH Electronic Co., Ltd. 99
PWAVeform[:IMMediate] <phase/chan>,<WAVEform>
This command is used to set and query the waveform of a phase in Normal mode.
For waveforms with parameters, the parameters are set to default values.
<wave>:
⚫ Sine
⚫ Square
⚫ Saw
⚫ Triangle
⚫ Trapezoid
⚫ Clipped-sine
⚫ DST-01(30)
⚫ Filename
Syntax:
PW
A
V
eform[:IMMedi
ate] <phase/chan>,
<W
A
VEfo
rm>
Arguments
<A|B|C|CH1|CH2|CH3>,
<"Sine"|"Square"|"Triangle"|"Saw"|"Trapezoid"|"Clipped-sine"|"DST-01(30)"|"filen
ame">
*RST
Sine
Query syntax:
Returns:
<string>
Example
PWAVE CH1,"Sine" // Set the channel 1 waveform of the current mode to Sine.
PWAVE A,"Sine" // Set the phase A waveform of the current mode to Sine.
PWAVE? A // Query the waveform of phase A.
PWAVE? CH1 // Query the waveform of channel 1.
WAVEform:EDIT:PARameter <phase/chan>,<percent1>
This command is used to set and query the waveform parameters of a
phase/channel (for Example, the percentage of clipping wave. For waveform
types without parameters, this parameter is invalid).
Syntax:
W
A
VEfor
m:EDIT
:P
ARameter
<phase/chan>,<perc
ent1>
To Next Page
Loading...