ITech IT8200 Series Programming Guide

FETCh & MEASure Subsystem
Copyright © ITECH Electronic Co., Ltd. 50
FETCh[:SCALar]:ARRay:CURRent:HARMonic:PHASe?
<[A|B|C]>,<NR1>
MEASure[:SCALar]:ARRay:CURRent:HARMonic:PHASe?
<[A|B|C]>,<NR1>
This command is used to measure each harmonic phase of the current.
Syntax:
FETCh[:SCALar]:ARRay:CURRent:HARMonic:PHASe? <[A|B|C]>,<NR1>
MEASure[:SCALar]:ARRay:CURRent:HARMonic:PHASe? <[A|B|C]>,<NR1>
Arguments
<[A|B|C|CH1|CH2|CH3]>,<NR1>
NR1: 0-50
Returns:
<NRf>
Example
FETC:ARR:CURR:HARM:PHAS? A,4
FETCh[:SCALar]:ARRay:VOLTage:HARMonic:DISTort?
<[A|B|C|CH1|CH2|CH3]>,<NR1>
MEASure[:SCALar]:ARRay:VOLTage:HARMonic:DISTor
t? <[A|B|C|CH1|CH2|CH3]>,<NR1>
This command is used to measure each harmonic distortion of the voltage.
Syntax:
FETCh[:SCALar]:ARRay:VOLTage:HARMonic:DISTort?
<[A|B|C|CH1|CH2|CH3]>,<NR1>
MEASure[:SCALar]:ARRay:VOLTage:HARMonic:DISTort?
<[A|B|C|CH1|CH2|CH3]>,<NR1>
Arguments
<[A|B|C|CH1|CH2|CH3]>,<NR1>
NR1: 0-50
Returns:
<NRf>

ITech IT8200 Series Specifications

General

Brand	ITech
Model	IT8200 Series
Category	Measuring Instruments
Language	English