ITech IT8200 Series

SOURce Subsystem
Copyright © ITECH Electronic Co., Ltd. 67
Example：
PSHift 90
PSHift?
[SOURce:]CFACtor[:LEVel][:IMMediate][:AMPLitude]
<NRf+>[,NRf+][,NRf+]
This command is used to set or query CF.
Syntax:
CFACtor[:LEVel][:IMMediate][:AMPLitude] <NRf+>[,NRf+][,NRf+]
Arguments
1.414 ~ 5
Query syntax:
CFACtor[:LEVel][:IMMediate][:AMPLitude]? [MAXimum| MINimum]
Arguments
<NRf+>[,NRf+][,NRf+]
Example：
CFACtor 5
CFACtor?
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]
<NRf+>
This command is used to set or query voltage value of DC mode.
Syntax:
VOLTage[:LEVel][:IMMediate][:AMPLitude] <NRf+>
Arguments
<NRf+>
Query syntax:
VOLTage[:LEVel][:IMMediate][:AMPLitude]? [MAXimum|MINimum]
Arguments
MAXimum|MINimum|DEFault
Example：
VOLTage 20