ITech IT8200 Series Programming Guide

IEEE-488 Common Commands
Copyright © ITECH Electronic Co., Ltd. 115
Default value
Refer to *PSC command
Example
*SRE 128
Query syntax
*SRE?
Returns
<NR1>
Related syntax
*ESE *ESR? *PSC *STB?
*STB?
This command reads the data in the Status Byte Register (SBR).
Query syntax
*STB?
Arguments
None
Returns
<NR1>
Related syntax
*CLS *ESE *ESR
Bit definition of the Status Byte Register:
Bit
7
6
5
4
3
2
1
0
Name
OPER
RQS
ESB
MAV
QUES
EAV
n.u
n.u
Value Bit
Weight
128
64
32
16
8
4
*PSC
This instruction is used to control whether the status register is cleared when the
instrument is powered-on. This instruction affects the value of the status register
at the next powered-on.
Syntax
*PSC <ON|1|OFF|0>

ITech IT8200 Series Specifications

General

Brand	ITech
Model	IT8200 Series
Category	Measuring Instruments
Language	English