ITech IT8200 Series

SOURce Subsystem
Copyright © ITECH Electronic Co., Ltd. 69
Query syntax:
[SOURce:]CE:TA:R? [MAXimum| MINimum]
Arguments
<NRf+>
Example：
CE:TA:R 100
[SOURce:]CE:TA:RL <NRf+>[,NRf+][,NRf+]
This command is used to set or query the RL under Parallel RLC. Unit:Ω
Syntax:
[SOURce:]CE:TA:RL <NRf+>[,NRf+][,NRf+]
Query syntax:
[SOURce:]CE:TA:RL? [MAXimum| MINimum]
Example
CE:TA:RL 10
[SOURce:]CE:TA:L <NRf+>[,NRf+][,NRf+]
This command is used to set or query the L value under Parallel RLC, Unit: mH
Syntax:
[SOURce:]CE:TA:L <NRf+>[,NRf+][,NRf+]
Query syntax:
[SOURce:]CE:TA:L? [MAXimum| MINimum]
Example
CE:TA:L 10
[SOURce:]CE:TA:RC <NRf+>[,NRf+][,NRf+]
This command is used to set or query the RC value under Parallel RLC, Unit:
Ω
Syntax:
[SOURce:]CE:TA:RC <NRf+>[,NRf+][,NRf+]
Arguments
<NRf+>,[NRf+],[NRf+]