ITech IT8200 Series Programming Guide

SURGesag Subsystem
Copyright © ITECH Electronic Co., Ltd. 95
SURGesag:VALue:SELect <mode>
This command is used to set and query the setting mode of the surge/trap wave
droping value.
<mode>: the expression mode of the surge/trap wave droping value
PERCent|SETTing
Syntax:
SURGesag:VALue:SELect <mode>
Arguments
PERCent|SETTing
Query syntax:
SURGesag:VALue:SELect?
Returns:
PERCent|SETTing
Example
SURGesag:VALue:SELect PERcent //Set the mode of the drop value to
percent
SURGesag:VALue:SELect?
SURGesag:VALue:PERCent <NRf+>
This command is used to set and query the percentage of the drop value of the
surge/trap wave.
<NRf+>: dropping percentage setting value.
Syntax:
SURGesag:VALue:PERCent <NRf+>
Arguments
<NRf+>
*RST
0
Query syntax:
SURGesag:VALue:PERCent?
Returns:
<NRf+>

ITech IT8200 Series Specifications

General

Brand	ITech
Model	IT8200 Series
Category	Measuring Instruments
Language	English