ITech IT8200 Series - 6.7 Screen Capture Function; 6.8 Trigger Function

SENSE Subsystem
Copyright © ITECH Electronic Co., Ltd. 53
Chapter13 SENSE Subsystem
SENSe[:REMote][:STATe] <CPD>
This command enables or disables the sense function.
Syntax:
SENSe[:REMote][:STATe] <CPD>
Arguments
<OFF|ON|0|1>
Default
0|OFF
Query syntax::
SENSe[:REMote][:STATe]?
Returns::
<OFF|ON|0|1>
Example
SENS ON
SENSe:FILTer[:STATe] <CPD>
This command sets and queries the state of meter filter switch.
Syntax:
SENSe:FILTer[:STATe] <CPD>
Arguments
0|OFF|1|ON
Query syntax::
SENSe:FILTer[:STATe]?
Returns::
0|OFF|1|ON
Example
SENSe:FILT OFF