ITech IT8200 Series

SURGesag Subsystem
Copyright © ITECH Electronic Co., Ltd. 94
waves.
<NR1+>: set value of continuously generated surge/trap waves.
Syntax:
SURGesag:REPeat:COUNt <NR1>
Arguments
<NR1>
*RST
1
Query syntax:
SURGesag:REPeat:COUNt?
Returns:
<NR1>
Example
SURGesag:REPeat:COUNt 5 //Set the number of continuous surge/trap
waves to 5.
SURGesag:PERiod:COUNt <NR1>
This command is used to set and query the period interval of the surge/trap wave
occurrence.
<NR1+>: the period interval setting value of the surge/trap wave occurrence.
Syntax:
SURGesag:PERiod:COUNt <NR1>
Arguments
<NR1>
*RST
1
Query syntax:
SURGesag:PERiod:COUNt?
Returns:
<NR1>
Example
SURGesag: PERiod:COUNt 5 //set the period interval of the surge/trap
wave occurrence to 5.