ITech IT8200 Series

Input Subsystem
Copyright © ITECH Electronic Co., Ltd. 75
Example
INPut:RECTified 1
INPut:INTegrity <CPD>
This command is used to set the integrity of the input waveform.
Syntax:
INPut:INTegrity <CPD>
Arguments
<FULL|POSitive|NEGative>
Query syntax:
INPut:INTegrity?
Returns:
<FULL|POSitive|NEGative>
Example
INPut:INTegrity FULL
INPut:PROTection:CLEar
This command is used to clear the protection status.
Syntax:
INPut:PROTection:CLEar
Example
INPut:PROTection:CLEar
INPut:PROTection:WDOG[:STATe] <state>
This command is used to enable or disable the watch dog function.
Syntax:
INPut:PROTection:WDOG[:STATe] <state>
Arguments
0|OFF|1|ON
Query syntax:
INPut|OUTPut:PROTection:WDOG[:STATe]?
Example
INPut:PROTection:WDOG 1