ITech IT8200 Series

FETCh & MEASure Subsystem
Copyright © ITECH Electronic Co., Ltd. 45
Syntax:
FETCh[:SCALar]:CURRent:HARMonic[:AMPLitude]?
<[A|B|C|CH1|CH2|CH3]>,<NR1>
MEASure[:SCALar]:CURRent:HARMonic[:AMPLitude]?
<[A|B|C|CH1|CH2|CH3]>,<NR1>
Arguments
<[A|B|C|CH1|CH2|CH3]>,<NR1>
NR1 range: 0-50
Returns:
<NRf>
Example
FETC:CURR:HARM? A,5
FETCh[:SCALar]:VOLTage:HARMonic:DISTort?
<[A|B|C]>,<NR1>
MEASure[:SCALar]:VOLTage:HARMonic:DISTort?
<[A|B|C]>,<NR1>
This command is used to measure voltage harmonic components.
Syntax:
FETCh[:SCALar]:VOLTage:HARMonic:DISTort? <[A|B|C]>,<NR1>
MEASure[:SCALar]:VOLTage:HARMonic:DISTort? <[A|B|C]>,<NR1>
Arguments
<[A|B|C|CH1|CH2|CH3]>,<NR1>
NR1 range: 0-50
Returns:
<NRf>
Example
FETC:VOLT:HARM:DIST? A,8