ITech IT8200 Series Programming Guide

SOURce Subsystem
Copyright © ITECH Electronic Co., Ltd. 65
Query syntax:
CURRent:SLEW[:AC]? [MAXimum| MINimum]
Example
CURR:SLEW 20.0 //set the current slope to 20.0A/ms
[SOURce:]CURRent:SLEW:DC <NRf+>
Sets the slope of the current in DC mode. Unit A/ms.
Syntax:
CURRent:SLEW:DC <NRf+>
Arguments
<NRf+>
Query syntax:
CURRent:SLEW:DC? [MAXimum| MINimum]
Example
CURR:SLEW:DC 20.0
[SOURce:]RESistance[:LEVel][:IMMediate][:AMPLitude]
<NRf+>[,NRf+][,NRf+]
Sets the resistance value. Unit W.
Syntax:
RESistance[:LEVel][:IMMediate][:AMPLitude] <NRf+>[,NRf+][,NRf+]
Query syntax:
RESistance[:LEVel][:IMMediate][:AMPLitude]? [MAXimum| MINimum]
Arguments:
<NRf+>[,NRf+][,NRf+]
Example:
RESistance 500
[SOURce:]POWer[:LEVel][:IMMediate][:AMPLitude]
<NRf+>[,NRf+][,NRf+]
Sets the power value. Unit W.
Syntax:
POWer[:LEVel][:IMMediate][:AMPLitude] <NRf+>[,NRf+][,NRf+]

ITech IT8200 Series Specifications

General

Brand	ITech
Model	IT8200 Series
Category	Measuring Instruments
Language	English