ITech IT8200 Series

FETCh & MEASure Subsystem
Copyright © ITECH Electronic Co., Ltd. 52
VETCor:DATA?
This command is used to query the vectior data of present order.
Syntax:
VETCor:DATA?
Arguments
无
Returns:
<NRf>,<NRf>,<NRf>,<NRf>,<NRf>,<NRf>
Example
VETCor:DATA?
VETCor:TYPE <CPD>
This command is used to set the vector type.
Syntax:
VETCor:TYPE <CPD>
Arguments
<U|I|ALL>
Returns:
U|I|ALL
Query syntax:
VETCor:TYPE??
Example
VETC:TYPE I