SYSTem Commands
Copyright © ITECH Electronic Co., Ltd. 6
SYSTem:REMote
This command takes the instrument out of front-panel control mode and switches
it to remote control mode.
Syntax
SYSTem:REMote
Example
SYST:REM
SYSTem:LOCal
This command is used to switch the power supply into the control from the front
panel.
Syntax
SYSTem:LOCal
Example
SYST:LOC
SYSTem:RWLock
This command locks the power supply in remote control mode. When this
command is executed, pressing the LOCAL button does not switch the instrument
to local control mode.
Syntax
SYSTem:RWLock
Arguments
None
Reset value
Not applicable
Example
SYST:RWL
SYSTem:BEEPer:IMMediate
This command tests the beeper function of the power supply. If it passes the test,
a beep is issued.
Syntax
SYSTem:BEEPer:IMMediate
To Next Page
Loading...
Need help?
General