Itotec SC115Z - Page 40

5
on the surface plate
holder.
How to change the knife
While holding the knife handle, fall the the knife
Loosen the knife handle to remove the knife
While holding the knife handle, house the knife
in the storage box. Remove the knife handle.
How to remove the knife 4
18.
19.
20.
20
20
19
19
18
18
19
19
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
When placing the knife on the surface plate,
do not allow the cutting edge protruding
from the surface plate.
Otherwise injuries will be caused with the
cutting edge.
When removing or installing the holder or
handle from/to the knife, be careful the
cutting edge of the knife.
Otherwise injuries will be caused.
When housing or retrieving the knife jn/out
of the storage box, use the knife handle
and keep away from the cutting edge.
Otherwise injuries will be caused with the
cutting edge.
Replace thr knife storage box or tying
strings with new ones immediately
if they have deteriorated.
To carry the knife, house the knife in the
storage box with the back of the knife
facing down and be careful of the cutting
edge.
Otherwise injuries will be caused due to the
sliding knife. As well, the storage box can
be broken and cause injuries,
Fix the knife in the storage box with bolts
or rope securely so that the knife will not
slide.
Otherwise injuries will be caused.
40