Johnson Controls SABROE Unisab III Control User Manual

Last e-mail status
Nothing sent No e-mail has been dispatched.
Success Last e-mail transmission was OK.
Invalid Sender Unisab III e-mail settings are not correct.
Invalid Recipient Recipients e-mail settings are not correct.
No connection It is not possible to establish connection to e-mail server.
DNS error DNS server IP address is not correct or the server is not available.
Authentication method Connection was rejected because Unisab III did not support the
requested e-mail server authentication method.
Authentication failed Connection to e-mail server was rejected during the authentication
session.
Discarded Last e-mail transmission has been interrupted during dispatch and
the number of Retries was exceeded.
The cause is probably a bad or unstable connection to e-mail serv-
er.
See also subsection 6.6.6. E-mail for information regarding the EmailService.xml file for set-
up of the e-mail and e-mail server addresses used for remote monitoring.
Service
Engineering manual - Unisab III 1.10
001930 en 2014.09
153/319

Johnson Controls SABROE Unisab III Control Specifications

General

Brand	Johnson Controls
Model	SABROE Unisab III Control
Category	Control Systems
Language	English