Johnson Controls SABROE Unisab III Control User Manual

6.5.4 Date-time
This picture shows the time in hours, minutes and seconds and
the date as Day, Month and Year.
Date and time must be set correctly in order for the shutdowns to be stored with the correct
time. This function has a battery back-up.
6.5.5 Oil charging (screw compressor)
Provided that the compressor is fitted with an oil charging pump the pump can be started in
the picture Oil charging:
To start the pump, proceed as follows:
Place the cursor on Run timer. Set the time that the pump is going to run and place the cur-
sor on Start oil pump. Change No to Yes and confirm by pressing .
The pump will now start and run for the set period. If the pump should stop before time expi-
ry, select No in the third line. The pump will now stop and run timer drop to 0.
Set-up
208/319
Engineering manual - Unisab III 1.10
001930 en 2014.09

Johnson Controls SABROE Unisab III Control Specifications

General

Brand	Johnson Controls
Model	SABROE Unisab III Control
Category	Control Systems
Language	English