Johnson Controls SABROE Unisab III Control - Transfer (Reciprocating Compressors); Take over (Reciprocating Compressors)

6.5.8 Transfer (reciprocating compressors)
In the Multisab system, which regulates and optimises more than one compressor, there is a
number of factors attached to a Transfer/Take-over function between reciprocating and screw
compressors. These factors are described in detail in the Unisab III sequence manual.
6.5.9 Take over (reciprocating compressors)
In the Multisab system, which regulates and optimises more than one compressor, there is a
number of factors attached to a Transfer/Take-over function between reciprocating and screw
compressors. These factors are described in detail in the Unisab III sequence manual.
Set-up
Engineering manual - Unisab III 1.10
001930 en 2014.09
213/319