transducer must be connected. See detailed description in section 3.5. Compressor control -
user functions.
8: Multisab Master
Start#
Compr#
If selecting Compr#, the compressor with the lowest compressor number will always be the
regulator in a Multisab system independent of the starting sequence. If selecting Start#, the
compressor with the lowest starting number and which is in Remote/Multisab will be the regu-
lator.
Set-up
Engineering manual - Unisab III 1.10
001930 en 2014.09
165/319
To Next Page
Loading...
