EasyManua.ls Logo

Johnson Controls SABROE Unisab III Control - Page 225

Johnson Controls SABROE Unisab III Control
322 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
This timer starts if the excess pressure delivered by the oil pump is less than a preset value.
An alarm is issued if the timer runs out. See subsection 2.2.35. Oil pump low pressure alarm
for more details about this alarm.
55. Oil pump low shutdown
For SAB SAB 120151, SAB 157 HR and 193355 compressors with oil pump.
This timer starts if the excess pressure delivered by the oil pump is less than a preset value.
A shutdown is issued if the timer runs out. See subsection 2.2.36. Oil pump low pressure
shutdown for more details about this shutdown.
56. Backspin delay
For SABflex compressors
This timer starts if the SSTV valve does not close correctly at stop giving a backwards flow
through the compressor. A shutdown is issued if the timer runs out. See subsection
2.2.40. VSD backspin for more details about this shutdown.
Set-up
Engineering manual - Unisab III 1.10
001930 en 2014.09
223/319

Table of Contents

Related product manuals