You may choose to import just one file, e.g. the Configuration.xml file, up to five files, or no
files at all depending on the settings you want to perform.
You can import files previously downloaded from Unisab III to a drive position, as described
under Download settings from Unisab III.
When the file(s) have been imported into U Set, the file contents will be displayed in the re-
spective U Set tables where the values can be reviewed, modified and printed.
The U Set tables are divided into the following tables:
• Configuration
• Analogue/regulator settings
• Calibration
• Timers
• E-mail
Unisab III (boot) and communication set-up
Engineering manual - Unisab III 1.10
001930 en 2014.09
275/319
To Next Page
Loading...
