Version no. Description
1.0.8.0 For screw compressors SAB 120-355 an oil pump error was shown with the
shutdown text “Oil pump error No.2” which has now been changed to “Oil
pump error” in order to have consistency between screw types.
The key can be used to step back in the five most recent menu pictures. It
has been observed that with supervisor password open this could fail and end
up in a loop between only two pictures - even if the last picture opened was a
picture different from these two. This has now been corrected.
In the History shutdown log some missing Digital Input and Digital Output pa-
rameters have been added.
Troubleshooting
302/319
Engineering manual - Unisab III 1.10
001930 en 2014.09
To Next Page
Loading...
