Johnson Controls SABROE Unisab III Control User Manual

Shutdown/alarm Id
Danbuss Profibus/
Modbus
Oil log Shutdown NA 79
No real time clock alarm NA 80
Low main oil pressure shutdown NA 80
Frick lubricating pressure low alarm NA 81
Low oil circuit pressure shutdown NA 81
High oil diff pressure alarm NA 82
Oil pump 2 error shutdown NA 82
Low oil separator temperature alarm + shutdown NA 83
High oil separator temperature alarm NA 84
Low oil circuit pressure alarm NA 85
Water pump error shutdown NA 85
High internal suction pressure alarm + shutdown NA 86
High pressure ratio alarm + shutdown NA 87
Liquid slugging alarm NA 88
VSD backspin shutdown NA 88
Network Connection to VSD
(VSD link missing)
alarm NA 89
General drive error shutdown NA 89
Start up limiter active alarm NA 90
Feedback error from VSD shutdown NA 90
High separator flow alarm NA 91
Network Connection to VSD
(Drive link error)
shutdown NA 91
Low main oil pressure alarm NA 92
Start up limiter error shutdown NA 92
Frick oil system error alarm NA 93
No evaporator flow shutdown NA 93
No condenser flow shutdown NA 94
High process in temperature alarm + shutdown NA 95
Low process in temperature alarm + shutdown NA 96
Forced speed active alarm NA 97
Emergency stop shutdown NA 97
Low process out temperature alarm + shutdown NA 98
High process out temperature alarm + shutdown NA 99
High internal pressure alarm + shutdown NA 100
Start RPM limiter alarm NA 101
Start RPM limiter error shutdown NA 101
Low oil eco pressure alarm + shutdown NA NA
Low Vi alarm NA 103
Critical oil circuit pressure shutdown NA 103
Lube pressure unload alarm NA 104
Oil pump low pressure alarm + shutdown NA 105
Alarms and shutdowns
Engineering manual - Unisab III 1.10
001930 en 2014.09
59/319

Johnson Controls SABROE Unisab III Control Specifications

General

Brand	Johnson Controls
Model	SABROE Unisab III Control
Category	Control Systems
Language	English