Johnson Controls SABROE Unisab III Control User Manual

2.2.10 Oil pump error (screw compressors)
49
2.2.11 Oil pump error (SAB 80)
49
2.2.12 Full flow pump error (screw compressors)
50
2.2.13 Cooling fan error
50
2.2.14 Oil rectifier error
50
2.2.15 Wrong starting number in sequence
50
2.2.16 Limiting suction pressure
50
2.2.17 Limiting discharge pressure
50
2.2.18 Limiting process out temperature
50
2.2.19 Limiting hot water
50
2.2.20 Limiting discharge temperature
50
2.2.21 Start-up limiter
50
2.2.22 Start up RPM limiter
51
2.2.23 Lube pressure unload alarm
51
2.2.24 No communication to chiller
51
2.2.25 Chiller, shutdown from chiller
51
2.2.26 Watch the oil pressure
51
2.2.27 Vi position error
51
2.2.28 Low lubricating pressure monitoring (screw compressor)
51
2.2.29 Oil log shutdown
52
2.2.30 Insufficient main oil pressure alarm
52
2.2.31 Insufficient main oil pressure shutdown
52
2.2.32 Low oil circuit pressure alarm
52
2.2.33 Low oil circuit pressure shutdown
52
2.2.34 Critical oil circuit pressure shutdown
52
2.2.35 Oil pump low pressure alarm
52
2.2.36 Oil pump low pressure shutdown
53
2.2.37 Liquid slugging alarm
53
2.2.38 Liquid slugging shutdown
53
2.2.39 High separator flow (screw compressor)
53
2.2.40 VSD backspin
53
2.2.41 Network connection to VSD alarm
53
2.2.42 Network connection to VSD shutdown
54
2.2.43 General drive error
54
2.2.44 Forced speed alarm
54
2.2.45 Oil pressure diagrams
54
2.3. Shutdowns and alarms with identification
numbers for screw compressors
58
2.3.1 Shutdowns and alarms for screw compressors
58
Engineering manual - Unisab III 1.10
001930 en 2014.09
5/319

Johnson Controls SABROE Unisab III Control Specifications

General

Brand	Johnson Controls
Model	SABROE Unisab III Control
Category	Control Systems
Language	English