8.10.3 Operation in the work platform
WARNING!
Faulty work platform safety mechanisms can cause accidents
Faulty work platform safety mechanisms (handles (two-hand compulsion), gate,
"Work platform raised" sensors...) can cause the work platform and / or the person in
the work platform to fall. Do not use the work platform if one of the safety
mechanisms is not working.
u
Test the work platform safety mechanisms before using it.
u
Report any defects immediately to your supervisor.
u
Tag out and decommission a faulty lift truck.
u
Only return the work platform to service when you have identified and rectified the
fault.
WARNING!
Work platforms can be hazardous
When operating the work platform the person in the platform is at risk from falling.
u
Close the work platform gate during operation.
u
Grab the work platform handles (two-hand compulsion) with both hands while the
truck is travelling and/or performing hydraulic operations.
u
Do not use other climbing tools (such as ladders, stools etc.) in the work platform.
u
The working platform must not be accessed or left while in a raised position.
u
Do not climb onto parts of the building or other trucks.
304
04.19 en-GB
To Next Page
Loading...
Need help?
General
