Juniper EX3300 Complete Hardware Guide

Locating the Serial Number on an EX3300 Switch or Component
If you are returning an EX3300 switch or hardware component to Juniper Networks for
repair or replacement, you must locate the serial number of the switch or component.
You must provide the serial number to the Juniper Networks Technical Assistance Center
(JTAC) when you contact them to obtain Return Materials Authorization (RMA).
If the switch is operational and you can access the CLI, you can list serial numbers for
the switch and for some components with a CLI command. If you do not have access to
the CLI or if the serial number for the component does not appear in the command output,
you can locate the serial number ID label on the physical switch (see Figure 47 on page 141)
or component.
NOTE: If youwant to find the serial number on the physical switchcomponent,
you will need to remove the component from the switch chassis, for which
you must have the required parts and tools available.
•
Listing the Switch and Components Details with the CLI on page 140
•
Locating the Chassis Serial Number ID Label on an EX3300 Switch on page 141
Listing the Switch and Components Details with the CLI
To list the switch and switch components and their serial numbers, enter the following
CLI command:
user@switch> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis GB0210504152 Virtual Chassis
Routing Engine 0 REV 02 750-034250 GB0210504155 EX3300 48-Port POE+
Routing Engine 1 REV 02 750-034250 GB0210504152 EX3300 48-Port POE+
FPC 0 REV 02 750-034250 GB0210504155 EX3300 48-Port POE+
CPU BUILTIN BUILTIN FPC CPU
PIC 0 BUILTIN BUILTIN 48x 10/100/1000 Base-T
PIC 1 REV 02 750-034250 GB0210504155 4x GE/XE SFP+
Xcvr 0 REV 01 740-021308 63152A01393 SFP+-10G-SR
Xcvr 1 REV 01 740-030658 AD0946A01Z6 SFP+-10G-USR
Power Supply 0 PS 900W AC
Fan Tray Fan Tray
FPC 1 REV 02 750-034250 GB0210504152 EX3300 48-Port POE+
CPU BUILTIN BUILTIN FPC CPU
PIC 0 BUILTIN BUILTIN 48x 10/100/1000 Base-T
PIC 1 REV 02 750-034250 GB0210504152 4x GE/XE SFP+
Xcvr 0 REV 01 740-021308 AJP0NRC SFP+-10G-SR
Xcvr 1 REV 01 740-021308 AJN0CXF SFP+-10G-SR
Xcvr 2 REV 01 740-021308 63152A00952 SFP+-10G-SR
Xcvr 3 REV 01 740-021308 63152A00753 SFP+-10G-SR
Power Supply 0 PS 900W AC
Fan Tray Fan Tray
Copyright © 2015, Juniper Networks, Inc.140
Complete Hardware Guide for EX3300 Ethernet Switches

Juniper EX3300 Specifications

General

Ethernet LAN	Yes
Authentication method	RADIUS, TACACS+
Connectivity technology	Wired
Ethernet interface type	Gigabit Ethernet
Number of VLANs	4096
Networking standards	IEEE 802.1ab, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3x, IEEE 802.3z
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Copper ethernet cabling technology	1000BASE-T, 100BASE-TX, 10BASE-T
Console port	-
ExpressCard slot	No
Fiber ports quantity	4
USB 2.0 ports quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Throughput	130 Mpps
Number of queues	8
MAC address table	16000 entries
Maximum data transfer rate	176 Gbit/s
Supported data transfer rates	10, 100, 1000Mbps
Switch type	Managed
Switch layer	L2
Security algorithms	SSH-2
Power source	AC
AC input voltage	100 - 240 V
Power consumption (typical)	100 W
Form factor	1U
Product color	Black
Flash memory	1024 MB
Processor frequency	1000 MHz
Compatible operating systems	Junos
Operating altitude	0 - 3049 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %
Supported network protocols	IPv6

Weight and Dimensions

Depth	310 mm
Width	437 mm
Height	44 mm
Weight	4900 g