Juniper EX3300

CHAPTER 4
Site Preparation
•
Site Preparation Checklist for EX3300 Switches on page 55
•
General Site Guidelines on page 56
•
Site Electrical Wiring Guidelines on page 57
•
Environmental Requirements and Specifications for EX Series Switches on page 59
Site Preparation Checklist for EX3300 Switches
The checklist in Table 23 on page 55 summarizes the tasks you need to perform when
preparing a site for EX3300 switch installation.
Table 23: Site Preparation Checklist
DatePerformed byFor More InformationItem or Task
Environment
“Environmental Requirements and
Specifications for EX Series Switches”
on page 59
Verify that environmental factors such as
temperatureand humidity do not exceed switch
tolerances.
Power
Measure distance between external power
sources and switch installation site.
Locate sites for connection of system
grounding.
“Power Specifications for EX3300
Switches” on page 71
Calculate the power consumption and
requirements.
Hardware Configuration
“EX3300 Switches Hardware
Overview” on page 3
Choose the number and types of switches you
want to install.
Rack or Cabinet
55Copyright © 2015, Juniper Networks, Inc.