The tables in this topic describe the optical interface support over single-mode fiber-optic
(SMF) and multimode fiber-optic (MMF) cables for SFP and SFP+ transceivers and over
the copper interface for SFP transceivers:
•
Table19 on page 31—Optical interface support and copper interfacesupport for Gigabit
Ethernet SFP transceivers.
•
Table 20 on page 42—Optical interface support for Gigabit Ethernet SFP+ transceivers.
Table 19: Optical interface Support and Copper Interface Support for Gigabit Ethernet SFP
Transceivers in EX3300 Switches
ValueSpecificationEthernet Standard
EX-SFP-1GE-TModel number1000BASE-T
10/100/1000 MbpsRate
RJ-45Connector type
CopperFiber count
–Transmitter wavelength
–Minimum launch power
–Maximum launch power
–Minimum receiver sensitivity
–Maximum input power
CopperFiber type
–Core/Cladding size
–Modal bandwidth
100 m (328 ft)Distance
Not availableDOM support
Junos OS for EX Series switches, Release 12.1 or laterSoftware required
Yes, starting with Junos OS Release 12.3R3Support for Virtual Chassis
configuration
31Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Component Specifications
To Next Page
Loading...
