Standards Supported by These Cables
The cables comply with the following standards:
•
SFP mechanical standard SFF-843—see ftp://ftp.seagate.com/sff/SFF-8431.PDF .
•
Electrical interface standard SFF-8432—see ftp://ftp.seagate.com/sff/SFF-8432.PDF .
•
SFP+ Multi-Source Alliance (MSA) standards.
Related
Documentation
• Pluggable Transceivers Supported on EX Series Switches
• Installing a Transceiver in an EX Series Switch on page 95
• Removing a Transceiver from a Switch on page 129
51Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Component Specifications
To Next Page
Loading...
