Juniper EX3400

2 clients, (0 bound, 0 selecting, 0 renewing, 0 rebinding)
IP address Hardware address Type Lease expires at
198.51.100.1 00:00:5e:00:53:01 active 2007-01-17 11:38:47 PST
198.51.100.3 00:00:5e:00:53:02 active 2007-01-17 11:38:41 PST
user@host> clear dhcp server binding 198.51.100.1
user@host> show dhcp server binding
1 clients, (0 bound, 0 selecting, 0 renewing, 0 rebinding)
IP address Hardware address Type Lease expires at
198.51.100.3 00:00:5e:00:53:02 active 2007-01-17 11:38:41 PST
clear dhcp server binding all
The following command clears all DHCP local server bindings:
user@host> clear dhcp server binding all
clear dhcp server binding interface
The following command clears DHCP local server bindings on a specific interface:
user@host> clear dhcp server binding interface fe-0/0/2
clear dhcp server binding <interfaces-vlan>
The following command uses the interfaces-vlan option to clear all DHCP local server
bindings on top of the underlying interface ae0, which clears DHCP bindings on all demux
VLANs on top of ae0:
user@host> clear dhcp server binding ae0
clear dhcp server binding <interfaces-wildcard>
The following command uses the interfaces-wildcard option to clear all DHCP local server
bindings over a specific interface:
user@host> clear dhcp server binding ge-1/0/0.*
clear dhcp server binding dual-stack all
The following command clears all the dual-stack local server bindings.
user@host> clear dhcp server binding dual-stack all
Copyright © 2017, Juniper Networks, Inc.344
DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches