Juniper EX3400

clear dhcpv6 server binding <interfaces-vlan>
The following command uses the interfaces-vlan option to clear all DHCPv6 local server
bindings on top of the underlying interface ae0, which clears DHCPv6 bindings on all
demux VLANs on top of ae0:
user@host> clear dhcpv6 server binding interface ae0
clear dhcpv6 server binding <interfaces-wildcard>
The following command uses the interfaces-wildcard option to clear all DHCPv6 local
server bindings over a specific interface:
user@host> clear dhcpv6 server binding ge-1/0/0.*
clear dhcpv6 server binding dual-stack all
The following command clears all the dual-stack local server bindings.
user@host> clear dhcpv6 server binding dual-stack all
355Copyright © 2017, Juniper Networks, Inc.
Chapter 14: Operational Commands (DHCP and DHCP Relay)