EasyManuals Logo

Juniper EX3400 Features Guide

Juniper EX3400
476 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #374 background imageLoading...
Page #374 background image
NOTE:
The dual-stack command is added in the syntax removes both arms
of the dual-stack with a single command entry.
When the dual-stack command is not added in the syntax, the clear
dhcpv6 server binding command clears only the family specific arm of
the dual-stack.
Required Privilege
Level
clear
Related
Documentation
Clearing DHCP Bindings for Subscriber Access
show dhcpv6 server binding on page 401
List of Sample Output clear dhcpv6 server binding all on page 354
clear dhcpv6 server binding <ipv6-prefix> on page 354
clear dhcpv6 server binding interface on page 354
clear dhcpv6 server binding <interfaces-vlan> on page 355
clear dhcpv6 server binding <interfaces-wildcard> on page 355
clear dhcpv6 server binding dual-stack all on page 355
Output Fields When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear dhcpv6 server binding all
The following command clears all DHCPv6 local server bindings:
user@host> clear dhcpv6 server binding all
clear dhcpv6 server binding <ipv6-prefix>
The following command clears DHCPv6 local server bindings for a specific IPv6 prefix:
user@host> clear dhcpv6 server binding 14/0x00010001/0x02b3be8f/0x00109400/0x0005
clear dhcpv6 server binding interface
The following command clears DHCPv6 local server bindings on a specific interface:
user@host> clear dhcpv6 server binding interface fe-0/0/2
Copyright © 2017, Juniper Networks, Inc.354
DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches

Table of Contents

Other manuals for Juniper EX3400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper EX3400 and is the answer not in the manual?

Juniper EX3400 Specifications

General IconGeneral
Switch typeManaged
Switch layerL2/L3
Quality of Service (QoS) supportYes
SafetyUL-UL60950-1, C-UL CAN/CSA 22.2 No.60950-1, TUV/GS to EN 60950-1, CB-IEC60950-1, EN 60825-1
Form factor1U
Product colorBlack
Electromagnetic compatibilityFCC 47CFR 15 A, EN 55022 A, ICES-003 A, VCCI A, AS/NZS CISPR 22 A, CISPR 22 A, EN 55024, EN 300386, CE
SFP+ module slots quantity4
QSFP+ module slots quantity2
Installed SFP+ modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity48
Memory typeDRAM
Noise level35 dB
Flash memory2000 MB
Processor frequency1000 MHz
Virtual stacking (units)10
Throughput250 Mpps
Jumbo frames9216
MAC address table32000 entries
Number of VLANs4093
Networking standardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3z
Virtual LAN featuresPort-based VLAN
Copper ethernet cabling technology10BASE-T, 100BASE-T, 1000BASE-T
Power consumption (max)120 W
Number of power supply units1
Operating altitude0 - 3048 m
Non-operating altitude3048 - 4877 m
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 45 °C
Storage relative humidity (H-H)0 - 95 %
Operating relative humidity (H-H)10 - 85 %
DHCP featuresDHCP server, DHCP client
AuthenticationMAC-based authentication, Port-based authentication
Security algorithms802.1x RADIUS, HTTPS, SNMP, SSH-2
Fiber ethernet cabling technology1000BASE-X
Weight and Dimensions IconWeight and Dimensions
Depth350 mm
Width437 mm
Height44 mm
Weight5740 g

Related product manuals