Table 21: show dhcpv6 relay binding Output Fields (continued)
Level of
OutputField DescriptionField Name
brief detailState of the DHCPv6 relay address binding table on the
DHCPv6 client:
• BOUND—Client has an active IP address lease.
• INIT—Initial state.
• REBINDING—Client is broadcasting a request to renew the
IP address lease.
• RECONFIGURE—Client is broadcasting a request to
reconfigure the IP address lease.
• RELEASE—Client is releasing the IP address lease.
• RENEWING—Client is sending a request to renew the IP
address lease.
• REQUESTING—Client is requesting a DHCPv6 server.
• SELECTING—Client is receiving offers from DHCPv6 servers.
State
briefIncoming client interface.Interface
detailDate and time at which the client’s IP address lease expires.Lease Expires
detailNumber of seconds in which the lease expires.Lease Expires in
detailDate and UTC time at which the client’s IPv6 prefix expires.Preferred Lease Expires
detailNumber of seconds at which the client’s IPv6 prefix expires.Preferred Lease Expires in
detailDate and time at which the client’s IP address lease started.Lease Start
detailLease time violation has occurred.Lease time violated
detailClient’s incoming interface.Incoming Client Interface
detailIP address of the DHCPv6 server.
Displays unknown for a DHCPv6 relay agent in a multi-relay
topology that is not directly adjacent to the DHCPv6 server and
does not detect the IP address of the server. In that case, the
output instead displays the Next Hop Server Facing Relay field.
Server Address
detailNext-hop address in the direction of the DHCPv6 server.Next Hop Server Facing Relay
detailInterface of the DHCPv6 server.Server Interface
detailIP address of the relay.Relay Address
detailAddress pool that granted the client lease.Client Pool Name
All levelsLength of client ID.Client ID Length
395Copyright © 2017, Juniper Networks, Inc.
Chapter 14: Operational Commands (DHCP and DHCP Relay)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
