Juniper PTX10001-36MR - Register Products-Mandatory to Validate Slas

2. Connect the other end of the Ethernet cable directly to a management console or console server.
Figure 38: Connect the PTX10001-36MR Directly to a Management Console
Figure 39: Connect the PTX10001-36MR to a Management Console Through a Console Server
RELATED DOCUMENTATION
PTX10001-36MR Management Panel | 15
Register Products—Mandatory to Validate SLAs
Register all new Juniper Networks hardware products and changes to an exisng installed product using
the Juniper Networks website to acvate your hardware replacement service-level agreements (SLAs).
CAUTION: Register product serial numbers on the Juniper Networks website. Update
the installaon base data if any addion or change to the installaon base occurs or if
the installaon base is moved. Juniper Networks is not responsible for not meeng the
hardware replacement service-level agreement for products that do not have registered
serial numbers or accurate installaon base data.
97