Juniper PTX10001-36MR - PTX10001-36 MR DC Power Supply LED

2—
Status LED
5—
Terminal block cover
3—
DC input current selector (DIP switch)
CAUTION: To avoid electrical injury, carefully follow instrucons in "Connect the
PTX10001-36MR to Power" on page 85.
PTX10001-36MR DC Power Supply LED
Each PTX10001-36MR DC power supply module has a status LED on the power supply module
faceplate (see Figure 17 on page 39).
Figure 17: PTX10001-36MR DC Power Supply Status LED Locaon
1—
Power supply status LED
Table 17 on page 39 describes the DC power supply module status LED.
Table 17: PTX10001-36MR DC Power Supply Status LED
Descripon
LED Color LED State Descripon
Unlit O The power supplies do not have DC power.
Green On steadily The power supply module is on and operang
properly.
39