Juniper PTX10001-36MR - Troubleshoot the PTX10001-36 MR; PTX10001-36 MR Troubleshooting Resources Overview

Troubleshoot the PTX10001-36MR
IN THIS SECTION
PTX10001-36MR Troubleshoong Resources Overview | 128
PTX10001-36MR Alarm Messages Overview | 129
System Alarm Messages on the PTX10001-36MR | 129
PTX10001-36MR
Troubleshoong Resources Overview
To troubleshoot a PTX10001-36MR, you use the Junos OS Evolved CLI, alarms, and LEDs on the
network ports, management panel, and components.
• LEDs—When the Roung Engine detects an alarm condion, it lights the red or yellow alarm LED on
the management panel as appropriate. You can also use component LEDs and network port LEDs to
troubleshoot the PTX10001-36MR. For more informaon, see the following topics:
• "PTX10001-36MR Chassis Status LEDs" on page 18
• "PTX10001-36MR Management Panel LEDs" on page 16
• "PTX10001-36MR Network Port LEDs" on page 13
• "PTX10001-36MR Fan Module LEDs" on page 24
• "PTX10001-36MR AC Power Supply LED" on page 28
• "PTX10001-36MR DC Power Supply LED" on page 39
• CLI—The CLI is the primary tool for controlling and troubleshoong hardware, Junos OS Evolved,
roung protocols, and network connecvity. CLI commands display informaon from roung tables,
informaon specic to roung protocols, and informaon about network connecvity derived from
the ping and traceroute ulies. For informaon about using the CLI to troubleshoot Junos OS
Evolved, see the appropriate Junos OS Evolved user guide.
128