Juniper PTX10001-36MR - General Site Guidelines

Table 22: PTX10001-36MR Environmental Tolerances (Connued)
Descripon Tolerance
Relave humidity
• Normal operaon ensured in relave humidity range of 5% through 90%, noncondensing.
• Short-term operaon ensured in relave humidity range of 5% through 93%,
noncondensing.
NOTE: As dened in NEBS GR-63-CORE, Issue 3, short-term events can be up to 96
hours in duraon but not more than 15 days per year.
Temperature
• Normal operaon ensured in temperature range of 32° F through 104° F (0° C through
40° C).
• Nonoperang storage temperature in shipping container: –40° F through 158° F (–40° C
through 70° C).
Seismic Designed to comply with Zone 4 earthquake requirements per NEBS GR-63-CORE, Issue 3.
NOTE: Install the PTX10001-36MR only in restricted areas, such as dedicated equipment rooms
and equipment closets, in accordance with Arcles 110-16, 110-17, and 110-18 of the Naonal
Electrical Code, ANSI/NFPA 70.
General Site Guidelines
Ecient device operaon requires proper site planning and maintenance. It also requires proper layout
of the equipment, rack or cabinet, and wiring closet.
To plan and create an acceptable operang environment for your device and prevent environmentally
caused equipment failures:
• Keep the area around the chassis free from dust and conducve material, such as metal akes.
• Follow prescribed airow guidelines to ensure that the cooling system funcons properly. Ensure
that exhaust from other equipment does not blow into the intake vents of the device.
• Follow the prescribed electrostac discharge (ESD) prevenon procedures to prevent damaging the
equipment. Stac discharge can cause components to fail completely or intermiently over me.
50