Juniper PTX10001-36MR - Remove the Solid-State Drives for RMA

Figure 52: Locate the PTX10001-36MR Fan Module Serial Number Label
Remove the Solid-State Drives for RMA
The PTX10001-36MR has two solid-state drives (SSDs) that store the soware images, system logs, and
the conguraon les. Before returning a chassis to Juniper Networks as part of a Return Merchandise
Authorizaon (RMA), you have the opon of removing the SSDs and disposing them according to your
own company’s security procedures. Before you begin this procedure, ensure you have the following
tools:
• ESD grounding strap (not provided)
• Number 2 Phillips screwdriver
Use this oponal procedure to remove the drives from the PTX10001-36MR aer the device has
shutdown and removed from the rack.
1. Aach the ESD grounding strap to your bare wrist and to a site ESD point.
2. Place the device on a rm surface such as a workbench or a table.
3. Turn the device over to locate the SSD access door.
140