Juniper PTX10001-36MR - Connect the PTX10001-36 MR to Power

8. Ensure that the device is level by verifying that all the screws on one side of the rack are aligned with
the screws on the other side of the rack.
Figure 28: The PTX10001-36MR Secured in a Two-Post Rack
RELATED DOCUMENTATION
PTX10001-36MR Installaon Overview | 76
Connect the PTX10001-36MR to Ground | 86
Connect the PTX10001-36MR to Power
IN THIS SECTION
Connect the PTX10001-36MR to Ground | 86
Connect AC/HVDC Power to the PTX10001-36MR | 88
Connect DC Power to the PTX10001-36MR | 90
85