Juniper PTX10001-36MR - PTX10001-36 MR Cooling System; PTX10001-36 MR Cooling System Description

PTX10001-36MR Cooling System
IN THIS SECTION
PTX10001-36MR Cooling System Descripon | 21
PTX10001-36MR Fan Module LEDs | 24
PTX10001-36MR Cooling System
Descripon
IN THIS SECTION
Fan Modules | 21
Airow Through the Chassis | 23
Fan Modules
The cooling system in a PTX10001-36MR device consists of fan modules and a single fan in each power
supply. There are six fan modules in the PTX10001-36MR. The airow direcon on the
PTX10001-36MR is airow out; air comes into the device through the vents in the front (port) panel.
The fan modules in the PTX10001-36MR are hot-insertable and hot-removable eld-replaceable units
(FRUs). These fan modules are designed for the airow out direcon. The fan modules are installed in
the fan module slots on the back panel (FRU) side of the device next to the power supplies. The
PTX10001-36MR has six fan modules numbered 0 through 5 from le to right. Each fan module slot has
a fan icon next to it.
21