Juniper PTX10001-36MR - PTX10001-36 MR Input DC Voltage Specification

(Connued)
Input Current Descripon
80 A The power supply module provides 3000-W output power throughout the input
voltage range from 40 VDC through 72 VDC.
PTX10001-36MR Input DC Voltage Specicaon
The PTX10001-36MR DC power supply modules operate within the DC input voltage range listed in
Table 18 on page 41. The PTX10001-36MR DC power consumpon is listed in Table 19 on page 41.
NOTE: Depending on the available input source, we recommend that the 48-VDC facility DC
source be equipped with a circuit breaker rated at a minimum of 60 A (48 VDC) or 80 A
(48 VDC), or as required by local code.
Table 18: PTX10001-36MR DC Power Specicaons
Input Switch
Seng
Minimum Input
DC Voltage
Rated Input DC
Voltage
Maximum Input
DC Voltage
Maximum Input
DC Current
Maximum
Output Power
60 A 40 VDC 48 VDC to
60 VDC
72 VDC 60 ADC 2700 W
80 A 40 VDC 48 VDC to
60 VDC
72 VDC 90 ADC 3000 W
Table 19: PTX10001-36MR DC Power Consumpon
Item Specicaon
Typical power consumpon 1538 W
Maximum power consumpon 2164 W
41