Juniper PTX10001-36MR - Unpack and Mount the PTX10001-36 MR; Unpack the PTX10001-36 MR

• Before installing thw PTX10001-36MR, read the guidelines in "PTX10001-36MR Site Preparaon
Checklist" on page 47 to verify that the intended site meets the specied power, environmental, and
clearance requirements.
• Before liing or moving the PTX10001-36MR, disconnect all external cables.
• As when liing any heavy object, li most of the weight with your legs rather than your back. Keep
your knees bent and your back relavely straight and avoid twisng your body as you li. Balance
the load evenly and be sure that your foong is solid.
RELATED DOCUMENTATION
Unpack and Mount the PTX10001-36MR | 78
Unpack and Mount the PTX10001-36MR
IN THIS SECTION
Unpack the PTX10001-36MR | 78
Mount the PTX10001-36MR in a Rack or Cabinet | 80
Unpack the PTX10001-36MR
The PTX10001-36MR chassis is a rigid sheet-metal structure that houses the hardware components.
The PTX10001-36MR is shipped in a cardboard carton, secured with foam packing material. The carton
also contains an accessory kit and a pointer card with links to the quick start instrucons.
CAUTION: PTX10001-36MR routers are maximally protected inside the shipping
carton. Do not unpack the PTX10001-36MR unl you are ready to begin installaon.
To unpack a PTX10001-36MR:
78