Juniper PTX10001-36MR - Site Electrical Wiring Guidelines

Table 23: Physical Specicaons for the PTX10001-36MR
Product SKU Weight Height Width Depth
PTX10001-36MR With all power supplies and
fans installed: 39.7 lb
(18.0 kg)
1.72 in. (4.3 cm) 17.36 in.
(44.09 cm)
25.89 in.
(65.76 cm)
Site Electrical Wiring Guidelines
Table 24 on page 53 describes the factors you must consider while planning the electrical wiring at
your site.
WARNING: You must provide a properly grounded and shielded environment and use
electrical surge-suppression devices.
Averssement Vous devez établir un environnement protégé et convenablement mis à
la terre et uliser des disposifs de parasurtension.
Table 24: Site Electrical Wiring Guidelines
Site Wiring
Factor
Guidelines
Signaling
limitaons
If your site experiences any of the following problems, consult experts in electrical surge
suppression and shielding:
• Improperly installed wires cause radio frequency interference (RFI).
• Damage from lightning strikes occurs when wires exceed recommended distances or pass
between buildings.
• Electromagnec pulses (EMPs) caused by lightning damage unshielded conductors and
electronic devices.
53