Juniper PTX10001-36MR - USB Port Specifications the PTX10001-36 MR

RJ-45 to DB-9 adapter supplied with the router and a USB to DB-9 plug adapter. You must
provide the USB to DB-9 plug adapter.
Table 34: Console Port and ToD Connector Pinouts for the PTX10001-36MR
Pin Signal Descripon
1 CTS Input Clear to send
2 DSR Output
ToD Output
Data set ready
Time of Day (ToD) for Precision Time Protocol (PTP) applicaons. You can use DSR pins as
a ToD universal asynchronous receiver/transmier (UART) by using breakout cables.
3 RxD Input Receive data
4 Signal Ground Signal ground
5 Signal Ground Signal ground
6 TxD Output Transmit data
7 DTR Input
ToD Output
Data terminal ready
Time of Day (ToD) for Precision Time Protocol (PTP) applicaons. You can use DTR pins as
a ToD universal asynchronous receiver/transmier (UART) by using breakout cables.
8 RTS Output Request to send
USB Port Specicaons the PTX10001-36MR
USB ash drives used with the PTX10001-36MR must support USB 2.0 or later.
73