Juniper PTX10001-36MR - PTX10001-36 MR DC Power Lugs

CAUTION: You must ensure that power connecons maintain the proper polarity.
WARNING: For eld-wiring connecons, use copper conductors only.
WARNING: DC power cables must not block access to PTX10001-36MR components
or drape where people could trip on them.
PTX10001-36MR DC Power Lugs
The accessory box shipped with the PTX10001-36MR includes the cable lugs that aach to the terminal
studs of each power supply module. (The cable lug shown in Figure 18 on page 44 is also used for
43